mooer drum pedal Mooer Groove Loop Drum Machine and Looper Pedal
SKU: 96899977785
mooer drum pedal

mooer drum pedal Mooer Groove Loop Drum Machine and Looper Pedal

$22.54 $25.04
Save 10%
No.2 Bestseller on proyectomirador.org >

Pay in installments of $6.26 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jun 29 - Jul 4

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

mooer drum pedal Mooer Groove Loop Drum Machine and Looper PedalMooer Groove Loop Drum Machine and Looper Pedal Groove Loop The MOOER GROOVE LOOP brings together both the MICRO LOOPER and MICRO DRUMMER into one micro pedal, for the ultimate in a portable jamming companion. Both elements can be used independently from one and other or simultaneously. When used simultaneously the looper will be automatically synchronised to keep in time with the drum groove youve selected and an intro click will be played when

Mooer Groove Loop Drum Machine and Looper Pedal

Groove Loop

The MOOER GROOVE LOOP brings together both the MICRO LOOPER and MICRO DRUMMER into one micro pedal, for the ultimate in a portable jamming companion. Both elements can be used independently from one and other or simultaneously.

When used simultaneously the looper will be automatically synchronised to keep in time with the drum groove you’ve selected and an intro click will be played when recording the first loop to ensure you’re in time with the groove.

The tap tempo button makes adjusting the groove speed very easy and independent playback level controls for both the Drums and the Looper ensure GROOVE LOOP is a breeze to dial in and adjust on the fly.

Main Features

*Micro Looper and Drum machine in one pedal
*8 drum groove styles with 2 variations of each (16 drum grooves in total)
*3 different modes. LOOPER, DRUM, LOOPER + DRUM
*Independent playback level controls for LOOPER and DRUM
*Tap tempo control for groove tempo

Specification

Maximum recording time: 20 minutes
Maximum number of recordings: unlimited
Sampling rate: 44.1KHz
Sampling accuracy: 16 bit
Input:1/4” mono audio jack.(Impedance: 1MΩ)
Output:1/4” mono audio jack(Impedance: 1kΩ)
Power requirements: 9V DC
Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
Weight:157g

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 96899977785

Discover Niche Categories That Outsell mooer drum pedal

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 2409 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Talagand
Los Angeles, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
A
Verified Purchase
Andy Sims
Whiting, US
★★★★★ 5
better then expected
Color: Black
very easy to put together works perfectly! very stable for the side would buy again!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
Y
Verified Purchase
Yuliet carreño cutiño
Battle Creek, US
★★★★★ 3
Divisor de habitaciones
Color: Black
La entrega fue perfecta , si debo de decir que en la descripción del producto decía que media 72 ancho x 72 alto pero no fue así su ancho es de 60 .
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 6, 2025
N
Verified Purchase
Nana rice
Waukegan, US
★★★★★ 5
Good purchase
Color: Black
We used this screen to divide the beds at a hotel. It gave the perfect privacy, was easy to put up and very sturdy
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 21, 2026
K
Verified Purchase
Kaylin
Fort Morgan, US
★★★★★ 1
Would not recommend
Color: Black
Product was terrible, it was not sturdy at all
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026

recommand products

Kinderfahrrad 24 Zoll
21.60
Kinder Fahrrad Sattel – ergonomisch & bequem
22.51
Bike Gear Wandhalterung aus Holz & Edelstahl
22.72
Fahrradhelm Regenschutz, Wasserdicht Winddicht – ROCKBROS-DE
28.27
24 Zoll Kinderfahrrad, Altec Dakota mit Gepäckträger, 7 Gang Shimano, – fahrrad-Ass.de
27.17